Draft Polygon/sv

Rectangle

BSpline

Draft

Description

A Draft Polygon can be switched from inscribed to circumscribed by changing its DataDraw Mode property. The corners of a Draft Polygon can be filleted (rounded) or chamfered by changing its DataFillet Radius or DataChamfer Size respectively.

Usage

See also: Draft Tray, Draft Snap and Draft Constrain.

Options

The single character keyboard shortcuts available in the task panel can be changed. See Draft Preferences. The shortcuts mentioned here are the default shortcuts (for version 1.0).

• To manually enter the coordinates for the center enter the X, Y and Z component, and press Enter after each. Or you can press the Enter point button when you have the desired values. It is advisable to move the pointer out of the 3D view before entering coordinates.
• Press G or click the Global checkbox to toggle global mode. If global mode is on, coordinates are relative to the global coordinate system, else they are relative to the working plane coordinate system.
• Press F or click the Filled checkbox to toggle filled mode. If filled mode is on, the created polygon will have DataMake Face set to true and will have a filled face.
• Press N or click the Continue checkbox to toggle continue mode. If continue mode is on, the command will restart after finishing, allowing you to continue creating polygons.
• Press S to switch Draft snapping on or off.
• Press Esc or the Close button to abort the command.

Notes

• A Draft Polygon can be edited with the Draft Edit command.

Preferences

See also: Preferences Editor and Draft Preferences.

• If the Edit → Preferences... → Draft → General → Create Part primitives if possible option is checked, the command will create a Part RegularPolygon instead of a Draft Polygon.

Properties

See also: Property editor.

A Draft Polygon object is derived from a Part Part2DObject and inherits all its properties. It also has the following additional properties:

Data

Draft

• DataArea (Area): (read-only) specifies the area of the face of the polygon. The value will be 0.0 if DataMake Face if false.
• DataChamfer Size (Length): specifies the length of the chamfers at the corners of the polygon.
• DataDraw Mode (Enumeration): specifies if the polygon is inscribed in a circle or circumscribed around a circle.
• DataFaces Number (Integer): specifies the number of sides of the polygon.
• DataFillet Radius (Length): specifies the radius of the fillets at the corners of the polygon.
• DataMake Face (Bool): specifies if the polygon makes a face or not. If it is true a face is created, otherwise only the perimeter is considered part of the object.
• DataRadius (Length): specifies the radius of the circle that defines the polygon.

View

Draft

• VyPattern (Enumeration): specifies the Draft Pattern with which to fill the face of the polygon. This property only works if DataMake Face is true and if VyDisplay Mode is Flat Lines.
• VyPattern Size (Float): specifies the size of the Draft Pattern.

Scripting

See also: Autogenerated API documentation and FreeCAD Scripting Basics.

To create a Draft Polygon use the make_polygon method (introduced in version 0.19) of the Draft module. This method replaces the deprecated makePolygon method.

polygon = make_polygon(nfaces, radius=1, inscribed=True, placement=None, face=None, support=None)

• Creates a polygon object with the given number of faces (nfaces), and based on a circle of radius in millimeters.
• If inscribed is True, the polygon is inscribed in the circle, otherwise it will be circumscribed.
• If placement is None the polygon is created at the origin and one of its vertices will lie on the X axis.
• If face is True, the polygon will make a face, that is, it will appear filled.

Example:

import FreeCAD as App
import Draft

doc = App.newDocument()

polygon1 = Draft.make_polygon(4, radius=500)
polygon2 = Draft.make_polygon(5, radius=750)

zaxis = App.Vector(0, 0, 1)
p3 = App.Vector(1000, 1000, 0)
place3 = App.Placement(p3, App.Rotation(zaxis, 90))

Polygon3 = Draft.make_polygon(6, radius=1450, placement=place3)

doc.recompute()

Rectangle

BSpline

Draft

Draft

• Drafting: Line, Polyline, Fillet, Arc, Arc by 3 points, Circle, Ellipse, Rectangle, Polygon, B-spline, Cubic Bézier curve, Bézier curve, Point, Facebinder, ShapeString, Hatch
• Annotation: Text, Dimension, Label, Annotation styles, Annotation scale
• Modification: Move, Rotate, Scale, Mirror, Offset, Trimex, Stretch, Clone, Array, Polar array, Circular array, Path array, Path link array, Point array, Point link array, Edit, Subelement highlight, Join, Split, Upgrade, Downgrade, Wire to B-spline, Draft to sketch, Set slope, Flip dimension, Shape 2D view

---

• Draft Tray: Select plane, Set style, Toggle construction mode, AutoGroup
• Snapping: Snap lock, Snap endpoint, Snap midpoint, Snap center, Snap angle, Snap intersection, Snap perpendicular, Snap extension, Snap parallel, Snap special, Snap near, Snap ortho, Snap grid, Snap working plane, Snap dimensions, Toggle grid

---

• Miscellaneous: Apply current style, Layer, Manage layers, Add a new named group, Move to group, Select group, Add to construction group, Toggle normal/wireframe display, Create working plane proxy, Heal, Show snap toolbar
• Additional: Constraining, Pattern, Preferences, Import Export Preferences, DXF/DWG, SVG, OCA, DAT
• Context menu:
  • Layer container: Merge layer duplicates, Add new layer
  • Layer: Activate this layer, Select layer contents
  • Text: Open hyperlinks
  • Wire: Flatten
  • Working plane proxy: Write camera position, Write objects state

User documentation

• Getting started
• Installation: Download, Windows, Linux, Mac, Additional components, Docker, AppImage, Ubuntu Snap
• Basics: About FreeCAD, Interface, Mouse navigation, Selection methods, Object name, Preferences, Workbenches, Document structure, Properties, Help FreeCAD, Donate

---

• Help: Tutorials, Video tutorials
• Workbenches: Std Base, Assembly, BIM, CAM, Draft, FEM, Inspection, Material, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

---

• Addons: Addon Manager, External workbenches, Scripting and macros

---

• Hubs: User hub, Power users hub, Developer hub